1. Do not use a high-speed polisher if the following conditions are found
The operator is not professionally trained.
The operator did not learn "safe operation procedures".
The high-speed polishing machine doesn't work properly.
2. Before applying the high speed polishing machine, please check the following environment
Operators should keep hands and feet away from the rotating polishing head.
The operator shall not step on the power cord or entangle it in the polishing head.
Operators need to wear safe clothing.
The automatic polishing machine can remove the rough part of the object surface to achieve the mirror effect. It is suitable for surface treatment of metal, ceramic, plastic and other products. In the operation of automatic polishing machine, there are some points to pay attention to.
First, when the automatic polishing machine is in operation, try to remove the damaged coating quickly at a high polishing speed. At the same time, we should ensure that the polished damaged layer does not affect the observed tissue, that is, there will be no false tissue.
The operation of automatic polishing machine is relatively simple. The operator only needs to put the polished object on the corresponding fixed device in advance. Install the fixture on the operation table of the automatic polishing machine, and then run the polishing machine. The automatic polishing machine can finish the polishing operation within the set time, automatically stop the worktable and remove it from the worktable.
Before polishing, the distance between polishing head and worktable should be adjusted to achieve better contact effect. Can be used in the polishing process of manual waxing, in order to reduce the cost of equipment manufacturing.
What are the benefits of maintaining an automatic polishing machine?
Automatic polishing machine maintenance is good, can ensure the normal operation of the equipment, reduce product wear, increase the service life of the equipment. Therefore, the daily maintenance of automatic polishing machine is also very important. Only in this way can we reduce the wear and tear of the equipment and reduce the maintenance cost and other abnormal expenses within the service life of the equipment.
How to maintain the automatic polishing machine?
The shorter the service life of the automatic polishing machine, the higher the reliability. The longer the service life, the lower the reliability. The automatic polishing machine is prone to failure. If the equipment is seriously worn, it is necessary to inform the technical department immediately and deal with it quickly.
Although the structure of the automatic polishing machine is simple, the following points should be paid attention to during the working time: the automatic polishing machine operates continuously for a long time, the polishing wheel has high friction heating temperature and is not easy to burn. Leather surface, so stop cooling before operation. Before and after the operation of automatic polishing machine, the surface of polishing wheel should be cleaned and waxed to achieve good product effect.
Before using the automatic polishing machine, carefully check the parts of each part to see if there are loose screws, worn parts, wiring damage and other conditions, and deal with them in time.
